Warranty & Technical Support Policy

Warranty & Technical Support Policy

Last Updated: May 2026

1. Introduction
This Warranty & Technical Support Policy explains the warranty coverage provided by TableTopKilns UK and the procedures for obtaining technical support and warranty service.
This policy should be read together with our Terms and Conditions and Returns & Refund Policy.

TableTopKilns UK is operated by:
Igors Popovs – Trading as TableTopKilns UK
Email: info@tabletopkilns.co.uk

2. Warranty Period
Unless otherwise stated in writing, all new kilns and equipment manufactured by TableTopKilns UK are supplied with a 12-month warranty from the date of delivery.
The warranty applies only to the original purchaser and is not transferable unless otherwise agreed in writing.
Proof of purchase must be provided for all warranty claims.

3. What Is Covered
The warranty covers defects resulting from:
Manufacturing faults;
Defective workmanship;
Defective electrical wiring;
Defective controllers supplied by us;
Defective components supplied by us;
Faults occurring during normal intended use.

Where a valid warranty claim is accepted, we may at our discretion:
Repair the product;
Supply replacement parts;
Replace the product;
Offer another suitable remedy.

4. What Is Not Covered
The warranty does not cover:
Accidental damage;
Physical impact damage;
Damage caused during transportation by the customer;
Water or liquid damage;
Corrosion;
Fire damage;
Cosmetic damage;
Unauthorised modifications;
Unauthorised repairs;
Incorrect installation;
Incorrect voltage supply;
Improper electrical connections;
Failure to follow operating instructions;
Commercial misuse;
Negligence.
Normal wear and tear is not covered by warranty.

5. Heating Elements
Heating elements are consumable components and are subject to wear during normal operation.
Their lifespan depends on:
Maximum firing temperatures;
Firing frequency;
Firing duration;
Atmosphere within the kiln;
Materials processed.
Because these factors are outside our control, heating elements are not covered against normal wear and deterioration.

6. Wax Burnout, Resin Burnout and Investment Casting Applications
Special attention should be paid when using kilns for:
Wax burnout;
Resin burnout;
Investment casting;
Lost wax casting;
Burnout of organic materials.
These processes may release fumes, vapours and contaminants that can significantly shorten the life of heating elements and internal components.
Therefore, warranty does not cover:
Heating element deterioration caused by burnout processes;
Contamination of insulation;
Contamination of thermocouples;
Corrosion caused by fumes or vapours;
Damage caused by materials introduced into the kiln chamber.
Customers performing burnout operations are responsible for maintaining adequate ventilation and following safe operating procedures.

7. Thermocouples
Thermocouples are subject to gradual deterioration during use, particularly at elevated temperatures.
Thermocouples are considered service items and are not covered against normal wear or gradual loss of accuracy.
Warranty may apply only where a manufacturing defect is demonstrated.

8. Controllers and Electrical Components
Electronic controllers, relays and electrical components are covered against manufacturing defects during the warranty period.
Warranty does not apply where failure results from:
Power surges;
Electrical faults;
Incorrect wiring;
Moisture ingress;
Environmental contamination;
Improper installation.

9. Customer Responsibilities
Customers must:
Read all supplied instructions;
Ensure proper installation;
Use suitable electrical protection;
Provide adequate ventilation;
Operate equipment within stated specifications;
Maintain the equipment responsibly.
Failure to do so may invalidate warranty coverage.

10. Technical Support
Technical support is available by:
Email: info@tabletopkilns.co.uk
To assist with diagnosis, customers may be asked to provide:
Order number;
Photographs;
Videos;
Controller settings;
Error messages;
Operating information.
Many issues can be resolved remotely without returning equipment.

11. Warranty Claim Procedure
To make a warranty claim, customers should contact us as soon as reasonably possible.
We may request:
Proof of purchase;
Photographs;
Video evidence;
Product serial number;
Description of the fault.
We reserve the right to inspect products before approving a warranty claim.

12. Transportation for Warranty Service
Unless otherwise agreed in writing:
Customers are responsible for safely packaging products;
Customers are responsible for transportation to our service facility;
Customers are responsible for transit insurance where appropriate.
Products damaged during transportation due to inadequate packaging may not be covered by warranty.

13. Replacement Parts
Replacement parts supplied under warranty become covered only for the remainder of the original warranty period.
Replacement of a component does not restart the warranty period.

14. Limitation of Warranty
This warranty is limited to the repair or replacement of defective products or components.
The warranty does not cover:
Loss of income;
Loss of business;
Loss of production;
Consequential losses;
Indirect losses;
Damage to third-party equipment.
Nothing in this policy limits any rights that cannot legally be excluded under the Consumer Rights Act 2015 or other applicable legislation.